Before You Start; Warranty; Saga / Aida; Cabinet Types - Norpe AIDA Bedienungsanleitung

PI

1. Before you start

Read these instructions carefully. They explain how to install, place, use and service the cabinet
correctly and safely.
Keep these instructions in a safe place and available for other users.
The cabinet must be installed and started up in compliance with the manufacturer's instructions
and in conformance with local instructions and regulations.
If a defect occurs in the cabinet or cabinet equipment, or the cabinet does not operate normally,
check that this does not create a hazard to people or property. If necessary, disconnect the
cabinet and contact the nearest service organisation. All users of the cabinet must be aware of
how to use the cabinet correctly and safely.

1.1. Warranty

Each cabinet has a one (1) year durability and material warranty for normal ambient conditions
(class 3).
Normal ambient conditions must not exceed:
• Relative humidity 60 % RH
• Ambient temperature +25 °C
• Frontal airflow < 0.2 m/s
NOTE The warranty does not extend to any breakage of glass, accidental or otherwise.

2. Saga / Aida

The cabinet is a display case with shelves intended for indoor use only. It maintains the correct
storage temperature for the products.

2.1. Cabinet types

The cabinet has different versions.
• -M version is fitted with an integrated condensing unit.
• -0 version does not have a condensing unit and is used as a remote installation.
• -A version is the ambient format of the cabinet.
• -H version is a heated display cabinet. It is equipped with heating resistors installed inside
the base of the tabletops, see figure 3 on the inside cover. The heat output of the resistors
is controlled by a thermostat that can be set to the desired temperature - generally +65 °C,
the maximum being +80 °C. See figure 4 and item C on the inside cover for Saga and figure
7 and item D for Aida.
Version 1/2011
ENGLISH
2