Operation - Glamox FL60 Betriebsanleitung

de
en
fr
tr
el
es

Operation

pt
da
nl
no
sv
pl
FL60, FL60N
cs
hu
FL60S4
:
Page 8 of 27

Junction box FL60:
Material Polycarbonat

Junction box FL60N:
Material: Aluminum die cast alloy

Junction FL60S:
approved connector, Material Polyamide, mounted
The input voltage must be disturbance-free within the indicated tolerances for
disturbance-free line operation. To eliminate disturbance effects, no other
consumers may be connected to the power supply line for the floodlight and
operated. We also recommend 3-phase operation.
The floodlight, in particular heat sink and lamp covers of the modules, must al-
ways be kept in a clean condition.
:
To prevent impermissible heating e.g. in case of direct sunlight, a two-stage
temperature control is provided, which reduces the power upon reaching fixed
defined temperatures. The switching values in respect to an optimum service life
of the LED are defined. The power is increased again if the temperature drops.
Temperature
Rise to 75°C
Rise to 85°C
Drop to 80°C
Drop to 70°C
Table 2 Temperature control
The electronic is temperature controlled.
Power
50%
25%
50%
100%
02.02.2016
in the housing,
7179761000/ Index 03 / DCN 21969