Keypad Beep - Midland 777 Bedienungsanleitung

HI AND LOW POWER
To extend the battery life, you can select the low power mode.
To activate the low power:
• turn on the unit
• press the
• select the low power by pushing the "▲" o "▼"[7] buttons.
• confirm by pushing the
With this procedure, the power is reduced of 10 times approx.

KEYPAD BEEP

To deactivate the keypad beep at the pressure of any key, follow these steps:
• Turn on your MIDLAND 777.
• press the
• Push "▲" o "▼"[7] until "bP of" appears on the display.
• confirm by pushing the
With this procedure, you won't hear any beep at the pressure of any button.
CALL TONE
MIDLAND 777 can send 3 different call tones (melodies). To send this audio signal to
other users, press rapidly the
To select the call tones:
• turn on the transceiver
• push
MODE
• push "▲" or "▼"[7]: you will hear the 3 pre-set melodies.
• confirm by pushing the
Now, each time your MIDLAND 777 will send out a tone call, it will beep with the
selected melody. To disable this feature, set "of" on the display.
VibraCall
MIDLAND 777 is equipped with the function "VibraCall", which provides a silent alert
for incoming tone calls.
To activate it, follow these steps:
1. turn on the unit.
2. press the MODE
3. pushing "▲" or "▼": you will enable/disable this feature.
4. confirm by pushing the
Note: A VibraCall Alarm can only be received by another MIDLAND 777, and not by
any other radio model. Also in case that the distant party should have selected one of
the 3 melodies for calling, such alarms will be detected as Vibra Call, if you should
have selected VibraCall in Your receiving radio.
MODE [4] button 4 times, until the display shows "Pr hi".
PTT [8]
MODE [4] button 5 times, until the display shows "bP on".
PTT [8]
PTT [8]
[4] 7 times, until the display shows "CA 1".
PTT [8]
[4 key 8 times, until the display shows the VibraCall Icon
PTT [8]
or simply wait 5 seconds.
or simply wait 5 seconds.
key twice.
key or wait 5 seconds.
key or wait 5 seconds.