Herunterladen Inhalt Inhalt Diese Seite drucken

Midland 777 Bedienungsanleitung Seite 13

Funkhandy set
Vorschau ausblenden Andere Handbücher für MIDLAND 777:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Completing the Radio
Install the Lithium Battery Pack
The radio comes with the Lithium Ion Battery separately packed.
Before first use, You should open the battery compartment, insert the battery and
recharge it for some hours.
Please hold the unit face down, unscrew the screw fixing the belt clip and slide the
cover towards the bottom of the radio. Then, insert the battery pack with the
description text up (contacts show to bottom side). Please observe
the safety precautions for all kind of Lithium batteries printed on the
batteries. Take care that the battery contacts are never touched
with any metal tools and never short circuited. Never place the
battery with the contact side on a metallic surface!
Charging battery: Jack CHG [2]
There are 2 ways to charge the battery. The external charger jack CHG [2] is
combined with the MIC Earphone socket (2.5 mm stereo). Insert the
charger plug into the CHG jack [2]. It is important that you use only
the recommended charger and no other charging equipment. Any
not specified power adaptor or wall charger may be dangerous and
can cause even fire or explosion risk of the lithium battery.
You may also use the double stand charger to recharge the battery. Just insert the
radio into stand charger and connect one of the charging cables of the 230 V wall
adaptor to the rear side of the stand charger.
Completely discharged batteries need around 10-14 hours for full charging. During
charge the battery icon will blink. After full charging the charging current will
automatically switch off. We do not recommend to let the radio switched on during
charging. In stand charger receiving is possible parallel to charging, but it will cause a
longer charging time.
Coverage (depends on the PMR 446 / LPD frequency band)
The maximum range is obtained during use in an open space in the PMR 446 band.
LPD band can be used for short-distance applications. The only limitation to
maximum possible range are environmental factors such as blockage caused by
trees, buildings, or other obstructions. Inside a car or a metallic constructions, the
range can be reduced.
Content
2 MIDLAND 777 transceivers
2 belt clips
2 carrying straps
1 double desktop charger
1 wall charger with double jack
instructions sheet
Please check the accessories and contact your distributor if something should be
missing

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis