Herunterladen Inhalt Inhalt Diese Seite drucken

Automatic Power Save - Midland 777 Bedienungsanleitung

Funkhandy set
Vorschau ausblenden Andere Handbücher für MIDLAND 777:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Reception
Simply release the
Background noise reduction (Squelch).
In your MIDLAND 777 the background noise reduction device (squelch) is activated
by default.

Automatic power save

MIDLAND 777 is supplied with an automatic current economy circuit. If the
transceiver receives no signal for 7 seconds or longer the "power save function"
automatically activates. This may increase the battery life by up to 50 %.
When the battery pack needs recharging, the
necessary to connect the wall charger to the charging jack or to use the stand
charger in connection with the wall charger.
Other key Functions
VOX: hands-free transmission
VOX function activation
Press the
MODE
[4] key three times. The display shows "VOX" blinking at the top left,
while on the right of the channel number, "of" appears. Select one of the two levels
UP/DOWN [7]
by means of
seconds for confirmation.
Speak into the microphone
accessories: the transmission is automatically activated.
VOX deactivation
Press the
MODE
while on the right of the channel number, the current sensitivity level will appear.
Select "off" using the
5 seconds for confirmation.
ROGER BEEP: end transmission tone
PTT [8]
When
is released the radio will beep to confirm to other users that your
transmission has finished. This feature is disabled by default.
To enable it, follow these steps:
1. Press the
MODE [4]
2. Select "oN" by using the
PTT [8]
3. Press
4. Roger Beep is now activated.
SCAN FUNCTION
The SCAN mode monitors the busy channels.
It is used to check speech traffic on the channels before transmitting and allows
the unit to stop on a channel that someone is talking on. In case of undesired
PTT
[8] button. When you receive a signal,
buttons and push the
[6]
[4] key again. The display shows "VOX" blinking at the top left,
UP/DOWN [2]
button 6 times until the LCD shows
UP / DOWN
key or
MODE [4]
button for confirmation.
battery icon
PTT [8] key,
or use one amongst the many compatible
buttons and push the
buttons [7].
RX
is displayed.
will be displayed [1]: it is
or simply wait 5
PTT [8] key,
or simply wait
"rb oF".

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis