Check Before Use; Specifications And List Of Contents - Felisatti DC10,8L2 Originalbetriebsanleitung

Return waste material
Do not incinerate the
battery pack
V - Volts
V - Direct Current
- Rotation only
- Class construction
n
V - No load speed
o
/min - Revolutions or reciprocations
per minute
~ - Alternating current
EC Declaration of conformity
We declares that these products meet the standards
EN 60745-1, EN 60745-2-1, EN 60335-1,
EN 60335-2-29, EN 55014-1, EN 55014-2,
EN 61000-3-2 and EN 61000-3-3
( Category )
in compliance with directives 2006/95/EC, 2006/42/EC,
2004/108/EC.
Jordi Carbonell
22
Max. 50
The battery
temperatures over 50
cause damage
Do not dispose of
batteries with general
refuse.
Santiago Lopes

Check before Use

1. The power source
Observe correct main voltage. The voltage
of power source must agree with the
voltage specified in the name plate.
Make sure the rated voltages in the electric
drill and the battery are the same. When the
rated voltage of the battery is higher than
that of the electric drill, the motor can be
damaged by fire.
2. Attachment of the battery
Make sure the battery is attached correctly
before you use the electric tool.
Make sure the battery is attached in the
body of the tool tightly before you start
operation. When the battery is not attached
tightly, it may be fallen during the operation
and cause an injury in the top of your foot.
3. Polarity of the battery
When the polarity of the battery is not correct,
it may cause the trouble of the switch. Also,
the reversal of the rotating direction can bring
a dangerous situation.
4. Trial run
Before starting the work, wear protection (goggles,
safety helmet, ear plugs, protective gloves) and runthe
tool in the direction avoiding other persons to see if the
tool is operated normaly.

Specifications and List of Contents

1. Specifications
Items
Rated voltage [V DC]
No l o ad speed
1st gear
[ / min ] 2nd gear
Chuck capacity[mm]
Tool
Weight(Without battery)[kg]
Maximum
capacity
[ mm]
Wood screw
Model
DC10.8L2
10.8
0-350
0-1300
0.8-10
0.8
Steel
10
Wood
15
6