Troubleshooting Mode 3, 4 & 5 Lock In Mode 3, 4 & 5 (Any User) - Flexlock Invisible Handbuch

11.4 Troubleshooting mode 3, 4 & 5 lock in mode 3, 4 & 5 (any user)
1. USER CARD
Wait for 7 sec and present the user card
straight and centered! Listen for sound.
Motorbuzz/confirmation signal = Lock OK
Error signal = Wrong user
No sound = Card might be defect
2. SERVICE CARD
Wait for 7 sec and present the service card
straight and centered! Listen for sound.
Motorbuzz/confirmation signal = Lock OK
Error signal = Wrong service card
No sound = Card or lock might be defect
3. PROGRAMMING CARD
Wait for 7 sec and present the programming
card straight and centered! Listen for sound.
Programming signal = Lock OK
Motorbuzz/confirmation signal =
Programming card is added as a service
card or user card.
Error signal = Wrong programming card
No sound = Card or lock might be defect
If nothing of the above works, contact your retailer!
1. Is it the correct storage?
2. Use the correct user card!
Provide a new user card!
Open lock = OK
1. Use the correct
Locked lock!
service card!
2. Add the
service card!
See the manual.
Add new service card & user!
See the manual.
Reset the lock with a pin!
See heading 7.7.
1. Use the correct programming card!
2. Reset with pin! See heading 7.7.
Change the lock!
English 19