Replacing The Batteries; After-Sales Service - Tanita HD-372 Bedienungsanleitung

HD-372_D 2005.4.21 10:52 AM

Replacing the Batteries

Your scale is operated by one lithium battery
for weighing. Lithium batteries can be typically
used for many years before replacement is
necessary. When the low battery sign, L,
appears on the LCD, please replace with one new lithium battery. The blue
backlight display is operated by one 9-volt alkaline battery. If the backlight does
not work, please replace with new battery.
Open the battery cover on the back of the measuring platform. Insert the new
battery as indicated.
Note: Be sure that the polarity of the batteries is set properly. If the batteries
are incorrectly positioned, battery fluid may leak and damage floors. If
you do not intend to use this unit for a long period of time, it is advisable
to remove the batteries before storage.
After Sales Service
Please contact the Tanita office nearest you regarding operation or trouble,
request for repair, and/or placement of an order for parts for products.
Page 4