Remote Control - Salora 55UHL2800 Benutzerhandbuch

Remote Control

Indexi
POWER: Power on or Standby mode
1.
MUTE: press to mute sound, press again
2.
or press VOL+ to unmute
0-9: press to select the TV channel you
want to watch. The channel will change
3.
after 2 seconds. Press to select page
number of teletext
DTV/ATV: switch between analog and
4.
digital TV
* : Return to the previous viewed
5.
program
S.MODE: press to scroll through the
6.
different sound settings
SLEEP: set the time before the TV will
7.
turn itself automatically off
8. MTS: press to search the NICAM modes
P.MODE: press to scroll through the
9.
different picture settings
MENU: allows you to navigate the on-
10.
screen menus
SOURCE: opens the main menu and press
11.
to view the source list
w s a d ENTER: allows you to navigate the
12. on-screen menus and adjust the system
settings to your preference.
EXIT: exit from the menus or sub-menus
13. and cancel the function in progress (if
applicable)
DISPLAY: press to display the source and
14.
channel's info
Battery Installation:
Remove the battery compartment cover at the rear of the remote control by sliding it downward and
take it off. Put the two AAA batteries in the compartment with their + and – ends aligned as indicated.
Do not mix old and new batteries or different type of batteries. Place back the cover by sliding it until
you hear a click.
Using the remote control:
Unless states otherwise, the remote control can operate all features of the TV. Always point the remote
control directly at the sensor at the front of the TV.