Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product Safety Information
Intended Use:
These Air Drills are designed for drilling, honing, reaming and hole sawing.
For Additional information refer to Air Drills Product Safety Information Manual Form 04580353.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Model(s)
Style
7811, 7811-EU
Pistol
7811R
Pistol
7816, 7816-EU
Pistol
7816R
Pistol
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16573180 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
1.
Air filter
2.
Regulator
3.
Lubricator
4.
Emergency shut-off valve
5.
Hose diameter
6.
Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts
be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
16571879_ed3
Free
Chuck
Speed
Capacity
rpm
inch (mm)
2100
3/8 (10)
1700
3/8 (10)
950
1/2 (13)
700
1/2 (13)
7.
8.
9.
10. Grease - during assembly
11. Grease - through fitting
Sound Level dB (A)
(ISO15744)
Pressure (L
)
Power (L
p
"K
"=3dB(A)
"K
pA
85.1
85.1
87.6
87.6
Coupling
Safety Air Fuse
Oil
EN
Vibration
Level
(ISO8662)
)
w
m/s²
"=3dB(A)
wA
96.1
0.5
96.1
0.5
98.6
0.2
98.6
0.2
EN-1
Werbung
