Instructions For Use - Sony NUA-BK10 Gebrauchsanweisung

Mounting the IP Converter
Caution
Always install the IP converter with its
front panel facing up and its connector
panel facing down.
1
Slide the IP converter onto the monitor
bracket from the side.
2
Secure the IPC bracket with the
supplied screws (M4×8) while holding
the bracket to support it.
(When attaching the unit with the
monitor stand attached)
Specifications
Storage and transport conditions
Temperature
–20 °C to +60 °C
(–4 °F to +140 °F)
Humidity
20% to 90% (no condensation
allowed)
Pressure
700 hPa to 1,060 hPa
Dimensions
IPC bracket
Approx. 194 × 123 × 10 mm
3 7
(7 / × 4
4
(W × H × D)
Monitor bracket
Approx. 80 × 120 × 39 mm
1 3
(3 / × 4
4
(W × H × D), 2 mm (0.079 in.)
(thickness)
Combination of both brackets
Approx. 233 × 123 × 41 mm
1 7
(9 / × 4
4
(W × H × D, excluding
protrusions)
Spacers
Approx. φ15 mm (0.59 in.)
(diameter), 2 mm (0.079 in.)
(thickness)
Mass IPC bracket
Approx. 130 g (4.6 oz.)
Monitor bracket
Approx. 150 g (5.3 oz.)
Combination of both brackets
Approx. 285 g (10 oz.)
Spacer
Approx. 2 g (0.071 oz.)
Supplied accessories

Instructions for Use (1)

M4×8 screws (2)
M6×12 screws (2)
13
/ × / in.)
8 32
9
/ × 1 / in.)
4 16
5
/ × 1 / in.)
8 8
7
Specifications
GB