Setting The Ip Address Using Arp/Ping - Axis Communications AXIS 5500 Handbuch

AXIS 5500/AXIS 5550 User's Guide

2.2.2 Setting the IP address using arp/ping

Refer to the appropriate section below to assign an IP address to your AXIS 5500/AXIS 5550 using
arp/ping:
Windows
1. Open a Command Prompt and enter the following commands:
Syntax
1. arp -s <IP address> <Ethernet address> arp -s 192.168.3.191 00-40-8c-18-16-36
2. ping <IP address>
3. arp -d <IP address>
2. The host will return
the address has been set and that communication is established.
3. Next, log in to the print server's web pages ( - See page 14) and define the Default Router and
Subnet Mask of your network: choose admin | Network Settings | Detailed View | TCP/IP.
UNIX/Linux, Mac OS X
1. Open a Terminal window and enter the following commands:
Syntax
1. arp -s <IP address> <Ethernet address> arp -s 192.168.3.191 00:40:8c:18:16:36
2. ping <IP address>
3. arp -d <IP address>
2. The host will return
the address has been set and that communication is established.
3. Next, log in to the print server's web pages ( - See page 14) and define the Default Router and
Subnet Mask of your network: choose admin | Network Settings | Detailed View | TCP/IP.
Notes:
•
The Ethernet Address/MAC address is the same as the serial number, found on the print server's underside
label. Enter the Ethernet Address in the same format as in the examples above.
•
Setting the IP address with arp and ping is only possible during the first ten minutes after re-booting the
print server. Re-boot the print server by disconnecting and then re-connecting its power supply.
•
When you execute the ping command for the first time, you may experience a significantly longer response
time than usual.
•
You need root privileges on your UNIX/Linux and Mac system in order to execute the arp command (refer to
the User's Manual for more information).
•
Use the command man arp to get a list of arp commands in UNIX/Linux.
reply from 192.168.3.191
192.168.3.191 is alive,
Example
ping 192.168.3.191
arp -d 192.168.3.191
, or a similar message. This indicates that
Example
ping 192.168.3.191
arp -d 192.168.3.191
or a similar message. This indicates that
13