Setting The Ip Address Using Axis Ip Jumpstarter - Axis Communications AXIS 5500 Handbuch

12

2.2.1 Setting the IP address using AXIS IP JumpStarter

AXIS IP JumpStarter can also be used to set the IP address of the print server. Install AXIS IP
JumpStarter, which is available from the AXIS Network Product CD or from the Axis web site at
www.axis.com
1. Select the required server from the serial number list in the IP JumpStarter dialog window.
2. From the Server menu, select Set IP Address.
3. Click the radio button that corresponds to your choice of IP setting method. You must define
the Subnet Mask and Default Gateway when assigning a static IP address.
4. Click OK to save your settings.
5. Enter the server root password (by default set to pass), and click OK.
6. The AXIS 5500/AXIS 5550 will appear in the list with the assigned IP address.
7. To verify that you have access the print server's web pages, highlight the print server in the list
and select Server Home Page from the Server menu.
Note:
If your print server does not appear in the serial number list, refer to the AXIS IP JumpStarter online help files or the
AXIS 5500/AXIS 5550 User's Manual which is available on the AXIS Network Product CD or from www.axis.com
AXIS 5500/AXIS 5550 User's Guide