Axis Communications AXIS 5500 Handbuch Seite 21

AXIS 5500/AXIS 5550 User's Guide
14. Enter the IP address of your print server (Example: 192.168.3.191) and assign an appropriate port
number (Example: 9902). Click OK.
Ports number
AXIS 5500
AXIS 5550
15. The TCP/IP port will then be added automatically to the list of available ports. Click OK and Apply.
16. You may now configure the port, as described below.
The Axis Printer Port is now installed.
Configure the Port:
1. Select Settings | Printers from the Start menu and highlight the printer you wish to
configure. Select File | Properties | Details and click Port Settings. Click the Configure Port
button.
2. Choose whether error condition pop-up messages are to be displayed by checking the box in
the Configure AXIS Ports dialog. Define the frequency at which the error messages should be
displayed after retry. Click OK.
Note:
Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the print driver
provided with the printer. This assures you of the latest driver software.
If you need additional information, refer to the AXIS 5500/AXIS 5550 User's Manual which is
available on the AXIS Network Product CD or from the Axis web site at www.axis.com
Proceed to Print Server Management and Configuration on page 26 for information on supported
management and configuration tools.
USB port
9902
9902
Parallel port
—
9900
21