Art RopeGuide TwinLine Anleitung Seite 22

info climb-ART.com @
the service life identification (year of manufacture) must be heeded.
Components which comprise several individual parts, but which are depicted as a whole in
the exploded assembly drawing, may not be disassembled by the user. Screw connections
provided with a coloured seal may not be unscrewed by the user.
If the equipment begins to slip in the blocked position, the friction clutch must be replaced.
If the device slips in spite of the new friction clutch, the counterpart must also be replaced.
If doubts nevertheless remain about the perfect state of the equipment, these must be referred
immediately to ART Enterprise GmbH or to one of the sites it has authorised in writing.
Warranty
ART Enterprise GmbH issues a warranty for manufacturing, functional and material faults for
a period of 2 years. This warranty, however, excludes all normal wear and tear through use,
oxidation and manipulation, as well as all damage which can be attributed to the effects of
impact, accidents and errors which have occurred during servicing, overhauling, storage,
transportation and application.
Inspection
This equipment may only be deployed if it is in perfect condition.
The functionality of this equipment must be checked by the user from a safety point of view
before and after every application. It is also important that no blind trust in the entire
safety-relevant equipment creeps in during deployment. Severe strain or any kind of
unusual occurrence may impair the faultless functioning of any kind of equipment.
This instruction manual contains a page with control data as well as a page for documenting
the inspection to be conducted at least once a year by a technical expert. The information
required for correct assessment of this equipment must be consistently entered during the
entire service life of the device.
Inspection criteria for the user and technical expert
- This device must be complete in accordance with the exploded assembly drawing;
- all screw connections must be complete and screwed tightly;
- all moving parts must be freely movable;
- all metal parts must be free from deformation, cracks and other damage;
- all textile components must be free from tears, cuts as well as contamination or abrasions
which permeate the structure.
- Wear and tear limits of replacable parts must be checked.
22