Startup/Power On; Hardware Configuration - Allen-Bradley MobileView MT750 Schnellstartanleitung

18 MobileView Machine Terminal MT750

Startup/Power On

1. Attach the MobileView Connection Cable to the Junction Box Cable as
shown on page 8. Tighten threaded coupling until it is finger tight.
2. Check the MobileView terminal for a start-up screen.
If the start-up screen does not appear, check the 24V dc power source and
cable connections at the Junction Box and MobileView terminal.
TIP

Hardware Configuration

1. From the task bar, select Start>Programs>MobileView>MV
Configuration Tool.
Publication 2727-QS003E-MU-P
An icon for RSView ME software appears on the MobileView
2727-M7P20D1Q2 and 2727-M7P20D1Q3 start-up screens only.