Operation; Maintenance - Grohe Ondus 45 983 Montageanleitung

GB
Safety notes
• Installation is only possible in frost-free rooms.
Application
With the preset panel, the following programmes can be
selected and changed:
- Hand washing
- Face splashing
- Teeth brushing
- 2 user-defined programmes
Technical Data
• Radio frequency:
• Transmitter power:
• Preset panel battery:
Electrical test data
• Software class:
• Contamination class:
• Rated surge voltage:
• Temperature for ball impact test:
The test for electromagnetic compatibility (interference
emission test) was performed at the rated voltage
and rated current.
Approval and conformity
This product conforms to the requirements
of the relevant EU guidelines.
The conformity declarations can be obtained
from the following address:
GROHE Deutschland Vertriebs GmbH
Zur Porta 9
D-32457 Porta Westfalica
Installation
Install preset panel, see fold-out page I, Figs. [1] and [2].
Insert batteries with correct polarity!
Settings during a power cut / when changing batteries
No settings saved by the user will be lost when changing
the batteries or in the event of interruption of the power
supply to the fitting.
2
2.4 - 2.4835 GHz
3 V lithium battery (type CR 2032)

Operation

Using the preset panel
Hand washing
Face splashing
Teeth brushing
Memory button 1
Memory button 2
- Before using the preset panel for the first time, it must
be connected to the control panel in setting mode under
< 10mW
Wireless.
- The programs can be customised or changed in setting
mode under Preset.
- The bars on the display illustrate the chronological
sequence of the relevant program.
B
Setting mode
2
Setting mode is activated as follows:
2500 V
1. Switch on the fitting via the
100 °C
the temperature to 33 °C using the
2. Press the buttons in a clockwise sequence:
3. When, after pressing for the third time, the GROHE
Logo appears, confirm with the button.
Setting mode is now activated and Menu appears
in the display.
This is confirmed using the button on the control panel.
Adjustment is made using the
mode by pressing the
Preset (program preset panel)
Section 1
Section 2
Section 7
Section 1

Maintenance

Battery, see fold-out page I, Fig. [1].
The battery must be replaced 10 years after commissioning
the fitting, at the latest.
Install in reverse order.
Disposal note
Dispose of batteries in accordance with national
regulations.
button and set
buttons. End setting
button.
Flow 0
Time 0
Temp 38.0
Volume 1
. . . .
. . . .
. . . .
. . . .
. . . .
button.