INVENTOR EP-MNC69 Bedienungsanleitung Seite 6

ASSEMBLY
Fig.1 Displays the connection between the hose and the Vacuum
cleaner.
Place the hose connector in Front if the vacuum cleaner,
then insert the hose connector. A clicking sound will confirm
successful attachment. To remove press the button.
Fig.2 Displays the connection of the hose with the extending
metal tube:
Press the connector while placing it into the tube.
Fig.3 Displays the connection between the tube and the brush
mount.
Place the metal tube into the brush mount then twist to fasten
Fig.4 Displays how to operate the winding power cord.
Extend the power cord until you see the yellow marking,
do not extend beyond to the red markings. When you have
completed the vaccuum operation, power off the device,
unplug, and press the winding button until the winding oft he
cord is complete.
Fig.5 displays the Power Button
Place the plug into the power socket, press the power button
for ON/OFF operation.
6
ΕΝ