Storing Stations - Grundig Ocean Boy 510 Bedienungsanleitung

Using alternative Frequencies
If the tuned station contains the RDS feature
ALTERNATIVE FREQUENCY, the button AF can
be used to switch between stations to find a
station with stronger signal.
GB
• Some stations transmit their programme on
several frequencies.
• After pressing the AF button the set tunes to
such an alternative frequency.
• If no alternative frequencies can be found the
display shows 'NO AF'.
• If no more frequencies are available the radio
switches back to the original tuned station
Note: all RDS features and as such the AF feature
are only available on the FM band. RDS stations
with weak reception will be ignored.

Storing stations

There are 10 memory locations in each
waveband available for storing stations
(in total 30 memory locations).
• Tune to the station you want to store .
• Press the MEMO button.
– The indication ' MEMORY ' starts flashing on the
display for 8 seconds.
• Press the number (1...10) you want to assign
the station to.
– Press the button once for a number from 1 to
5 and twice for a number from 6 to 10.
• Press MEMO again to store the station.
• Select and store in this way all desired
stations.
Note: If no station is stored within the 8
seconds that 'MEMORY' is flashing, the storing
mode is abandoned with no change to the
current memory.
16
RADIO OPERATION
Calling up a stored station
• To call up a stored station, simply press the
corresponding button.
– Press the button once for a number from 1 to
5 and twice for a number from 6 to 10.
– The unit switches to the station and the display
indicates the frequency, ' MEMORY ' and the
memory location number.
EON
MEMORY
MEMORY
Traffic information /
Enhanced other networks (EON)
Some RDS radio stations broadcast traffic
informations at certain times. These stations are
indicated by the symbol ' ' on the display.
The EON function is an additional RDS feature
to switch to a station broadcasting traffic
information.
• Switch on the radio with the ON/OFF button.
• Tune to an RDS station.
– The '
' symbol appears.
• Press the TRAFFIC button once.
• If the tuned station provides traffic information,
the ' ' symbol lights up on the display.
• If the tuned station does not provide traffic
information, the ' ' symbol will not light up
and you will hear a 'beep' tone when
pressing TRAFFIC.
• If the tuned station provides EON, the 'EON'
indicator on the display lights up, next to the
' ' symbol.
– An EON station does not contain traffic
information by itself but provides a reference
to another programme with traffic information.
– The radio will automatically tune to the other
station when this station starts broadcasting a
traffic announcement.
– During the EON traffic announcement the
EON symbol on the display flashes and the
volume will be increased.
• When the announcement is over, the radio
will return to the previous station.
• To immediately switch back to the previous
station, press the TRAFFIC button.
• To disable this function, press TRAFFIC again.
The ' ' and 'EON' indicators disappear.