General Safety Information - heicko JSS25 Einbau- Und Bedienungsanleitung

Dear Customers,
Thank you for choosing a quality product from heicko e-ast GmbH. We appreciate your trust.
Our venetian blinds are developed and produced with a high degree of quality and reliability. Furthermore they are maintenancefree and offer a long life
span.
Conformity
This product fulfills the requirements of the valid European and national guidelines and laws.
Relevant documents of conformity are available.
Important! - The user manual
This manual describes the installation and the operation of the venetian blind with rechargeable tubular motor, technical data on page 14.
Please read the instructions carefully and follow the safety instructions before starting to work with the motor / operating the venetian blind.
Please retain this manual and hand it over to the staff for electrical installation, and the user. In case of change of ownership, please hand over the
manual to the subsequent owner. This manual is also part of the warranty conditions.
Important! - Explanation of symbols
Safety and proper functioning of the product
Be aware of actions which might lead to injuries or damages. These instructions must
be observed and followed.
For disposal use "electrical / electronic junk" collection points offered by local authorities or disposal services. Point out that the device
includes a battery.

1. General safety information

• With the operating voltage of 12 V (low voltage), these motor types are electrically safe. The protection against electric shock is based on the
Application of this low voltage. Further protective measures for electrical safety are not required.
• Since the battery supply eliminates the connection to the electrical building network, no electrician is required for the installation.
• The Charging the motors must be carried out exclusively with the charger, Item no. HR1200LA-12.6 (not included). The charging electronics of the
motor's batteries are tuned to this charger.
• When using other chargers, we assume no warranty / liability for errors in the charging process and resulting damage.
• The permanently installed Li-Io batteries can not be removed from the venetian blind and are therefore not changeable.
• It is important to ensure that no liquids can penetrate into the motor. If the poles of Li-Io batteries are short-circuited there is a risk of fire or even
explosion.
• After charging the motor, disconnect the charger from the motor and remove it from the mains supply.
• Maintaining the battery capacity to 100% promotes the aging of Li-Io batteries and therefore reduces their life.
• The batteries are subject to low self-discharge. If the motor has not been in use for a long period of time, we recommend charging the batteries at the
latest after about half a year
• The duration of the motor's battery capacity depends on certain factors, e.g. the load and the application habits. As a result of changing / swapping
application habits, the duration of the battery capacity of the motor per battery charge may fluctuate.
Using defective devices can endanger persons and incur material damage.
• The venetian blind with drive must be checked for perfect condition
• Never use defective or damaged devices.
• If you notice damage on the device, the device must not be used. In this case please contact your specialised company or
dealer.
A risk of injury exists if the device is not used for the intended purposes, as described in the user manual.
• Responsible persons should be instructed of the safe use of the venetian blind with rechargeable tubular motor.
• Personnel should keep a safe distance away from the moving venetian blinds.
• Children should be kept under supervision and playing with the controls should be prevented at all times.
Remote controls should not be left within reach of children.
Intended use
Our tubular motors are exclusively designed for the opening and closing of venetian blinds. Please follow the operating instructions.
Requirements
• Only use original components and accessories provided by the manufacturer.
• A compatible charger must be available to charge the rechargeable tubular motor.
- Compatible charger, item no. HR1200LA-12.6
,
-10-