• Apply uniform force to tighten the tool
(Fig. 14) until the small pin (E) comple-
tely enters the hole in the link.
Note
To avoid irreparable damage to the
chain, NEVER TIGHTEN the tool beyond
the locator stop. Allow the small pin (E) to
protrude 0.1 mm from the internal side of
the chain (Fig. 15).
• Remove the clamping device and
remove the chain from the tool.
• Slide the small guide pin (D) out of the
link (Fig. 16).
15
Internal side
of the chain.
E
ENGLISH
0,1 mm
14
16
External side
of the chain.
E
D
33