Intended Use; Installation - Baaske Medical MI 1005 Handbuch

2. Intended Use

The MI 1005 is an appliance especially developed
for use in medical technology. The purpose of the
MI 1005 is to connect, in compliance with the re-
levant norms for electrical safety (IEC 60601-1) and
EMC (IEC 60601-1-2), a medical appliance or system
equipped with a network interface to a non-medical
appliance or system (Single PC or local network). Ex-
amples for the use of the MI 1005 :
• Connection to the practice or clinic
networks with the PC of a prolonged
EEG system
• Connection to an analysis computer in
the doctor's or consulting room with an
EMG measuring station

3. Installation

Only qualified and trained personnel should install
the MI 1005. Please instruct your network systems
administrator or your medicine technology depart-
ment for this pur-pose. The installation of the MI
1005 is done by means of the two pluggable Ether-
net Interfaces (RJ-45-sockets). To do this, plug the
network connection cable into the socket of the MI
1005, until the lock engages with an audible ‚click'.
Page 25
MI 1005 Manual V3
ENGLISH
11-2019