General Safety Advice; Place Of Installation - Baaske Medical MI 1005 Handbuch

1. General Safety Advice

Read this manual carefully before installing and
implementing the MI 1005.
a. The MI 1005 must be installed and
implemented by qualified and trained
personnel.
b. Do not open the case of the MI 1005.
There are no serviceable parts inside.
c. Faulty or defective devices have to be
exchanged and returned to the
manufacturer.
d. Before operating the MI 1005 in
combination with medical devices, make
sure that the manufacturer of the medical
device permits the galvanic isolation of the
Ethernet Signal.

1.1 Place of Installation

During installation ensure that the MI 1005 is
protected from penetration by moisture, high
humidity and mechanical damage. It should not be
operated in areas or atmospheres with combustib-
le gas mixtures.
The MI 1005 should also not be operated in close
Page 21
MI 1005 Manual V3
ENGLISH
11-2019