EN
DIAGRAM OF THE COMPONESNTS (See drawing) Care
1. Outer casing Warning
2. Adjusting knob
3. Ceramic grinder
4. Battery compartment
5. Clear cup
BATTERY INSTALLATION
1. To remove outer casing, turn the outer casing anti-clockwise and
then lift upwards.
2. Install 6 "AAA" batteries into the battery compartment,
Ensuring the "+" and "-" polarities are aligned.
3. Replace outer casing, turning clockwise to lock.
4. To start using your GRAVITY mill, just tilt it!
TO FILL
1. Turning clockwise to screw out the clear cup.
2. Pour Peppercorn or sea salt into the clear cup.
3. Replace clear cup, turning anti-clockwise to lock.
3