Quick Start Guide; Egg Cooker - nedis KAEB120EAL Kurzanleitung

a

Quick start guide

Egg cooker

For more information see
the extended manual online:
ned.is/kaeb120eal
Intended use
This product is intended for cooking eggs.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have
consequences for safety, warranty and proper
functioning.
This product is intended to be used in household
and similar applications such as:
-
kitchen areas in shops, offices and other working
environments
-
farm houses
-
by clients in hotels, motels and other residential
type environments
-
bed and breakfast type environments
Specifications
Product
Article number
Dimensions (w x h x d)
Voltage
Power
Maximum number
of eggs
Main parts (image A)
1
Cover
2
Egg tray
3
Body
4
Indicator LED
5
Power button
6
Measuring cup
7
Power cable
KAEB120EAL
Egg cooker
KAEB120EAL
86 x 202 x 135 mm
220 - 240 VAC ; 50 /
60 Hz
210 W
3
Safety instructions
- WARNING
•
Only use the product as described in this manual.
•
This product may only be serviced by a qualified
technician for maintenance to reduce the risk of
electric shock.
•
Do not drop the product and avoid bumping.
•
Do not use the product if a part is damaged or
defective. Replace a damaged or defective device
immediately.
• Disconnect the product from the electrical outlet
and other equipment if problems occur.
•
Unplug the product when not in use and before
cleaning.
•
Do not unplug the charger by pulling on the
cable. Always grasp the plug and pull.
• Do not touch the hot parts of the product
directly.
•
Do not let the power cable touch hot surfaces.
•
Do not leave the product unattended when
switched on.
• Place the product on a stable and flat surface.
• Only handle the product with dry hands.
Handling with wet hands might cause an electric
shock.
•
Never immerse the product in water or place it in
a dishwasher.
• Close supervision is necessary when the product
is used by or near children, animals or infirm
persons. Do not allow children to play with it or
touch it.
•
Do not switch on the product without the cover
on.
• Avoid injuries from the egg pricking device.
•
Place the product on a heat resistant surface.
Installing the product
1. Remove all packaging.
2. Place the product on a stable and flat surface.
3
3. Fill body A with 70 ml water.
4. Press power button A
a boil.
Be careful when opening A
-
escape.
5. Discard the water.
6. Repeat 2 times to remove any dust or residue
from the manufacturing process.
4
5
to bring the water to
1
, hot steam may