Leonard LKT1441 Benutzerhandbuch Seite 26

26 leonard
2. Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge. Make
sure that the clearance between the
appliance and the cupboard is 4 mm.
3. Adjust the appliance in the niche.
The lower hinge cover (in the accesso-
ries bag) makes sure that the distance
between the appliance and the kitchen
furniture is correct.
Open the door. Put the lower hinge
cover in position.
4mm
44mm
4. Attach the appliance to the niche with 4
screws.
5. Remove the correct part from the hinge
2
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
1
I