Nettoyage Et Entretien - Domo DO7293S Gebrauchsanleitung

Cleaning Side Brushes
duct Maintenance
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if it's damaged. The maximum life span of
de Brushes
the side brush is 12 months.
ning Side Brushes
Clean the side brush when it become dirty and replace it if it's damaged. The maximum life span of Chargement sans la station de chargement
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
· Prenez l'adaptateur, branchez la fiche secteur dans une
the side brush is 12 months.
rush when it become dirty and replace it if it's damaged. The maximum life span of
the side brush when it become dirty and replace it if it's damaged. The maximum life span of
prise de courant, et raccordez la fiche DC à l'appareil.
with the L/R mark on the bottom base of the robot.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
s 12 months.
· Durant le chargement :
e brush is 12 months.
de Brushes
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
· L'écran affiche 1111 clignotant : l'appareil est en charge
placing side brushes, check and ensure that the L/R mark on the side brush match
Before replacing side brushes, check and ensure that the L/R mark on the side brush match
Cleaning Dust Bin and Filters
rush when it become dirty and replace it if it's damaged. The maximum life span of · L'écran affiche FULL : l'appareil est complètement
rk on the bottom base of the robot.
e L/R mark on the bottom base of the robot.
Empty and clean the dust bin after each usage following the steps as show in the figures below:
chargé
12 months.
Empty and clean the dust bin after each usage following the steps as show in the figures below:
ust Bin and Filters
· L'écran affiche Erro : le bouton marche/arrêt doit être
ning Dust Bin and Filters
lacing side brushes, check and ensure that the L/R mark on the side brush match
en position marche pour charger
k on the bottom base of the robot.
n the dust bin after each usage following the steps as show in the figures below:
and clean the dust bin after each usage following the steps as show in the figures below:

NETTOYAGE ET ENTRETIEN

st Bin and Filters
NETTOYAGE DU COLLECTEUR DE POUSSIERE ET DU FILTRE
n the dust bin after each usage following the steps as show in the figures below:
Nettoyez le collecteur de poussière et le filtre après chaque utilisation selon la procédure suivante :
1
A. Hold the bottom of dust bin, and press down on the button using your
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
thumb to take out of the dust bin.
om of dust bin, and press down on the button using your
d the bottom of dust bin, and press down on the button using your
ut of the dust bin.
to take out of the dust bin.
m of dust bin, and press down on the button using your
3
ut of the dust bin.
C. After press down button
C. After press down button
and o
pen dust bin upper cover
and o
pen dust bin upper cover
5
D. Open dust bin cover and take out the
down button
ter press down button
primary filter and HEPA filter.
D. Open dust bin cover and take out the
n upper cover
pen dust bin upper cover
down button
primary filter and HEPA filter.
n upper cover
F. Wash the dust bin and primary filter under tap water,
F. Wash the dust bin and primary filter under tap water,
1. Appuyez sur le bouton d'ouverture pour ouvrir le collecteur de poussière. Enlevez ce dernier de
clean the HEPA filter with brush, avoid washing it under
clean the HEPA filter with brush, avoid washing it under
l'appareil.
water.
water.
2. Ouvrez le collecteur en appuyant sur le bouton d'ouverture.
3. Retirez le filtre HEPA, ainsi que son support, hors du collecteur de poussière.
4. Videz le collecteur au-dessus de la poubelle.
bin and primary filter under tap water,
h the dust bin and primary filter under tap water,
5. Rincez le collecteur de poussière et le porte-filtre sous l'eau courante. Laissez-les sécher avant de les
bin and primary filter under tap water, lter with brush, avoid washing it under
he HEPA filter with brush, avoid washing it under
remettre en place. Nettoyez le filtre HEPA à l'aide d'une petite brosse à poussière.
ter with brush, avoid washing it under
· Quand le filtre HEPA est sale, après environ 30 jours d'utilisation, vous pouvez également le
passer sous l'eau courante. Laissez-le sécher avant de le remettre en place.
· Après de multiples utilisations, le filtre HEPA doit être remplacé. La durée maximale d'utilisation
du filtre est d'environ 6 mois.
20
DO7293S
D. Open dust bin cover and take out the
D. Open dust bin cover and take out the
primary filter and HEPA filter.
primary filter and HEPA filter.
D. Open dust bin cover and take out the
primary filter and HEPA filter.
G. Assemble primary filter and HEPA filter again into
G. Assemble primary filter and HEPA filter again into
G. Assemble primary filter and HEPA filter again into
dust bin.
dust bin.
dust bin.
16
16
16
in Fig a. Clean the side brush when it become dirty and repla
B. Press the "HOME" button on the remote control or robot to
the side brush is 12 months.
charging docking automatically as shown in Fig b.
Note: Before replacing side brushes, check and ensu
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage follow
Note:
a. When robot is in charging, the LED panel will gradually show
b. When charging is over, the LED panel will show "FULL".
A. Hold the bottom of dust bin, and press down on the b
c. In standby status, the robot will
thumb to take out of the dust bin.
2
d. In working status, the robot will look for the charging dock au
level is low.
In Order to Extend Battery's Life
a. Please charge the robot for up to 5 hours during the first cha
b. Charge the robot as soon as possible when battery capacity
B. Take out dust bin.
c. The robot will return to the charging dock automatically whe
B. Take out dust bin.
capacity is low.
d. When you do not use the robot for some time, please fu
B. Take out dust bin.
4
switch off the robot and keep it in a cool but dry place.
C. After press down button
e. If the robot has been put aside over 3 months, please ch
and o
pen dust bin upper cover
before using it for cleaning.
6
E. Empty the dust bin.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
E. Empty the dust bin. clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
G. Assemble primary filter and HEPA filter again into
dust bin.
dust bin.
16
16
Fig a
show
B. Take out dust bin.
B. Take out dust bin.
D. Open dust bin cover
primary filter and HEPA
E. Empty the dust bin.
E. Empty the dust bin.
when the batt
10
G
du
16