Inhaltsverzeichnis
Werbung
Power LED Header
(3-pin PLED1)
(see p.1, No. 27)
Serial ATA3 Connectors
(SATA3_0, SATA3_1 :
see p.1, No. 12)
(SATA3_2, SATA3_3 :
see p.1, No. 13)
(SATA3_4, SATA3_5 :
see p.1, No. 15)
SAS Connectors
(SAS_0_1:
see p.1, No. 17)
(SAS_2_3:
see p.1, No. 18)
(SAS_4_5:
see p.1, No. 19)
(SAS_6_7:
see p.1, No. 20)
(SAS_8_9:
see p.1, No. 21)
(SAS_10_11:
see p.1, No. 22)
(SAS_12_13:
see p.1, No. 23)
(SAS_14_15:
see p.1, No. 24)
32
Please connect the chassis
1
power LED to this header
PLED-
PLED+
to indicate the system's
PLED+
power status.
These six SATA3
connectors support SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. If the eSATA port
on the rear I/O has been
connected, the internal
SATA3_5 will not
function.
These sixteen SAS-
3 connectors support
SAS/SATA data cables
for internal storage
devices. The current SAS-
3 interface allows up to
12.0 Gb/s data transfer
rate. The current SATA3
interface allows up to
6.0 Gb/s data transfer
rate. For connecting SAS
HDDs, please contact SAS
data cable dealers.
*It is not recommended to
connnect DVD-ROM to
the SAS-3 connectors.
Werbung
Inhaltsverzeichnis
