Setting The Alarm & Timers; Setting The Alarm - PURE Verona Bedienungsanleitung

Setting the alarm & timers

Setting the alarm

Verona has an alarm which switches the radio on (if in standby mode) and tunes to a DAB or FM
radio station, or sounds an alarm tone. If using a ChargePAK, Verona will switch completely off
when the standby button is pressed. This means that any alarms you have set will not go off.
1. Press the (Alarm/Timer) button and select 'Alarm' to display the alarm status screen.
2. Push the Tune dial to select 'Set alarm', scroll to 'Alarm on' and push the Tune dial to select.
The alarm is now active.
Alarm off
Set alarm
3. Push the Tune dial to select 'Set time'. To set the time you want the alarm to sound turn the
Tune dial to adjust the hours and then push to confi rm. Repeat to adjust the minutes.
07:00
08:00 set hour
4. Push the Tune dial to select 'Set days'. Choose when you want the alarm to repeat (turn the
Tune dial to browse through the options and push to select).
Daily Every day
Weekday Monday – Friday, every week
Weekend Every weekend
Saturday Every Saturday
Sunday Every Sunday
Once only The alarm will sound at the time you have selected and not repeat.
5. Push the Tune dial to select 'Set mode' and choose the type of alarm you want to sound:
DAB, FM or Tone. If you select 'Tone', there are no further options.
6. For DAB and FM alarms only, push the Tune dial to select 'Select station' and choose which
DAB or FM radio station you want to sound for the alarm.
For DAB alarms
Select a DAB station from the station list, or a previously stored preset.
For FM alarms
Choose between 'Last tuned' or an FM preset station. If you select 'Last tuned' the alarm will
tune to the last FM station you listen to before the alarm sounds.
Tune
Tune
Tune
Alarm off
Alarm on
Tune
If you want to set a
'one-off' alarm choose
'Once only'.
Tune
EN
7