LOFT
54F 03 00xE
Step 2 : Use the parts of step 1, both sides P3 and four wood screws C
Place the supports with their drillings on the holes of the sides (P3). Push the wood screws (C) in the dril-
lings at the bottom of the supports and tighten them in the sides.
Step 3 : Use the parts of step 2, the Loft chest 54 F03 00x, three mounting plates J and six bolts H
Place the extension on the top of the chest of drawers so that the drillings at the bottom of the extension
are aligned with the holes inside the open compartments of the chest. Place the mounting plates (J) on
both drillings and fi x each plate with two bolts (H).
Luierextensie
Wickelansatz
Changing extension
Plan à langer
Quax
Quax
First dreams
First dreams
®
®
First steps
First steps
17