How To Insert The Transmitters; Led Indicators - Beyerdynamic SLG 900 Bedienungsanleitung

SLG 900 – Charging Unit

6. How to insert the transmitters

• Put the switched off transmitters into the charging compartments. Turn the handheld transmitter slightly as
shown in the drawing. The bottom of the transmitter must lock in place.
Put the beltpack transmitter into the charging compartment as shown in the drawing.
• The appropriate LED will display if the transmitter has been inserted correctly.

7. LED indicators

Each charging compartment is controlled separately. The appropriate LEDs indicate the charging process.
LED will flash green . . . . . . . . . . . . . . battery is being charged
LED illuminates green . . . . . . . . . . . . battery is fully charged
LED illuminates red . . . . . . . . . . . . . . an error has occured during charging
Note:
• When the LED is permanently illuminated red, remove the transmitter from the charging compartment and
repeat the charging process after 15 minutes.
If the LED is still illuminated red, please contact your beyerdynamic dealer.
14