Coldmaster PRISMA 400 TNV-PF Betrieb Und Instandhaltung Seite 10

REGOLAZIONE E PULIZIA
CONTENTS:
Packing:
1. Unpacking Instructions.
Mounting the accessories:
2. The handle.
3. Round glass shelving.
4. Grid shelving.
Cleaning and controls:
5. Internal cleaning.
6. External cleaning.
7. Connection to the mains.
8. Controls.
9. Checking correct operation.
WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future reference and for
reasons of safety. 1. Adults should operate this appliance only. Do not allow children to use the controls or play with it.
2. It is forbidden to modify in any way the main functions and characteristics of this appliance. 3. The electrical installation of
the appliance should be carried out by a qualified electrician or other competent person. 4. Never attempt to carry out repairs
unassisted. Inexpert repairs can cause serious damage and malfunction.5. Assistance has to be provided by an authorized
engineer only. Always use original spare parts.6. This appliance is not suitable for the storage of basic commodities not
including food-stuffs.7. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without prior notice.8. Avoid
installing the cabinet directly in line with sunlight. 9. Nevere install the appliance near sources of heat, such as radiators,
stoves, etc.10. Keep the ventilation grills free from obstruction for at least 30 cm. 11.Ensure that the products displayed on the
shelves and grills do not hang over the edges. 12. If damp air or products to be refrigerated should cause ice to form on the
evaporator, we recommend stopping the compressor and placing the goods in special refrigerated containers, kept at the same
temperature, until defrosting is completed;if this is not carried out the compressor will continue to operate leading to a
wasteful consumption of electricity and poor performance.13. If the appliance is not working and unused, it is indispensable
to keep the door open at least 10 cm.
1. UNPACKING INSTRUCTIONS
CARDBOARD PACKAGE 1a Cut the strap and lift up the cardboard package. WOODEN CRATE 1b Remove the nails
from the wooden crate with care. 2. Insert the forks of a forklift truck between appliance and pallet or crate. 3. Lift the
appliance. 4. Remove the pallet or crate. 5. Place the appliance on a flat and level surface. 6. Make sure there is nothing left in
the package before disposal. 7. Separate the packaging materials to facilitate disposal (see figure 1).
2. THE HANDLE
1. The handle can be found in a bag inside the appliance. 2. Fix the handle base to the door frame using the two screws
already inserted in the holes. Tighten with care. 3. Place the plastic insert over the handle and press down until it clicks into
place (see figure 2).
3. ROUND GLASS SHELVING
1. Take the shelves from the cardboard box and place them on the supports of the uprights. 2. First mount the mirror shelf at
the bottom (see figure 3).
4. GRID SHELVING
PRISMA 400 TN/PF and PRISMA 400TB/PF models
1. The shelves are in the bottom of the cabinet. 2. Fit the grids into the height-adjustable supports (see figure 4)
5. INTERNAL CLEANING
1. Clean the internal parts and glass panels, using soft cloths and neutral detergents. 2. Dry with a soft cloth.
6. EXTERNAL CLEANING
1. Use the same products as used for the internal cleaning.
Regular maintenance:
10. Cleaning the condenser.
11. Internal cleaning.
12. Cleaning the evaporator.
Extraordinary maintenance:
13. Replacing the internal lights.
14. Replacing the door's magnetic gasket.
15. Adjusting the door.
16. Replacing a glass panel.
Diagrams:
Wiring Diagram (page 4)
Wiring Diagram (page 5)
Refrigeration Unit Diagram (page 6)
PRISMA 400 TN/PG model
10
GB