Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Oscillation function:
- The oscillation function makes it
possible to direct the flow from the
apparatus so that it automatically
alternates over a range of 75º.
- To activate this function turn the
knob H.
- To deactivate this function, follow
the procedure for switching it on in
reverse.
Once you have finished using the
appliance:
- Stop the appliance by turning the
timer switch to the "Off" position.
Cleaning
- Disconnect the appliance from
the mains and let it cool before
undertaking any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Do not submerge the appliance in
water or any other liquid, or place it
under a running tap.
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems
arise. Do not try to dismantle or
repair without assistance, as this
may be dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
For EU product versions and/or in
case that it is requested in your
country:
Ecology and recyclability of the
product
- The materials of which the
packaging of this appliance consists
are included in a collection,
classification and recycling system.
Should you wish to dispose of them,
use the appropriate public containers
for each type of material.
- The product does not contain
concentrations of substances that
could be considered harmful to the
environment
- This symbol means that in
case you wish to dispose of
the product once its working
life has ended, take it to
an authorised waste agent
for the selective collection
of waste electrical and
electronic equipment
(WEEE)
This appliance complies with
Directive 2006/95/EC on Low
Voltage and Directive 2004/108/EC
on Electromagnetic Compatibility.
Werbung
