Spare Parts List - Anest Iwata W-200 Bedienungsanleitung

W-200
HIGH T.E.C. Series_ PRESSURE | SUCTION
8.1 INSPECTION AND REPLACEMENT STANDARD
WHERE TO INSPECT
Each hole passage of air cap set (1) and fluid nozzle set (2-1).
Packings and O'rings.
Leakage from seat section between fluid nozzle (2-1) and fluid
needle set (2-2).

9. SPARE PARTS LIST

18
19
2-1
1
W-2003
DESCRIPTION
Ref.
AIR CAP SET
1
2-1
FLUID NOZZLE SET
2-2 FLUID NEEDLE SET
4 NEEDLE PACKING SET
AIR NIPPLE
5-1
FLUID NIPPLE
5-2
PATTERN ADJUSTMENT SET
6
AIR VALVE SEAT
7
7-1 'O' RING
AIR VALVE
8
AIR VALVE SPRING
9
FLUID ADJUSTMENT GUIDE SET
10
11 NEEDLE SPRING SET
12 FLUID ADJUSTMENT KNOB
AIR VALVE SHAFT
13
AIR ADJUSTMENT SET
14
PLUG
14-1
15 TRIGGER STUD
TRIGGER SET
16
E STOPPER
17
BRUSH
18
19 UNIVERSAL SPANNER
4
17
15
16
14-1
Model
ALL MODELS
W-200 S18 | S25
ALL MODELS
REPLACEMENT PART
Replace air cap or fluid nozzle if they are crushed or deformed.
Replace if deformed or worn out.
Replace them if leakage does not stop after fully cleaning fluid
nozzle (2-1) and fluid needle set (2-2).
If you replace fluid nozzle (2-1) or fluid needle set (2-2) only, fully
match them and confirm that there is no leakage.
6
13
8 9
2-2
5-1
11
14
NOZZLE AND NEEDLE SET COMBINATION
Models
Size
0.8 (0.031)
n
1.0 (0.039)
1.2 (0.047)
n 1.4 (0.055)
W-200
1.5 (0.059)
1.8 (0.071)
2.0 (0.079)
2.5 (0.100)
0.8 (0.031)
1.0 (0.039)
n
W-200 WB
1.2 (0.047)
n
1.6 (0.063)
1.8 (0.071)
1.5 (0.059)
W-200 ZP
2.0 (0.079)
2.5 (0.100)
W-200 ZP
1.0 (0.039)
n
S18 | -S25
2.0 (0.079)
W-2003
2.5 (0.100)
NEVER REMOVE FLUID NIPPLE FROM GUN BODY! Any malfunc-
tions resulting by the removal of the following parts will not be
covered by the Warranty. In case of replacement contact your
Technical Service directly.
When ordering parts, specify gun model, part name with No.
and marked No. of air cap set, fluid nozzle and fluid needle.
Marked parts are wearable parts.
n
W-200 S25
7
7-1
10 G1/4"M
W-200 S18
12
G1/4"M
NPSM 1/4"F
Fluid Nozzle Fluid needle
mm (inch) Mark
W200 /08
W200 /10
W200 /12
W200 /14
W200 /15
W200 /18
W200 /20
W200 /25
200WB /08
200WB /10
200WB /12
400WB /16
400WB /18
W200 /15Z
W200 /20Z
(common parts)
W200 /25Z
W200 /10
W200 /20
W200 /25
EN
G1/4"M
Mark
20012 H
20012 H
20012 H
20015
20015
20020
20020
20025
40012
40012
40012
20015
20020
NON MARK
20010
20020
20025
7