Maestro MR 1721 Bedienungsanleitung Seite 4

USE
1.Firmly hold the lower section of the grinding chamber 0 and
turn the top e in a counterclockwise direction (see Figure A). A'dick'
sound will be heard.
2.Pull the top e off the grinding chamber 0.
3. Pull the motor Q3 carefully off the grinding chamber O.
4.Insert 6 new AAA 1.5V batteries (not included). Insert using the
correct polarity.
5.Fill up the grinding chamber 0 with peppercorns and coarse salt.
Fill the grinding chamber up 75% for best results. 6. Put the motor
back on the grinding chamber. Please make sure the contacts of ®
and e face each other.
7. Put the top e back on the grinding chamber O. 8. Firmly hold the
grinding chamber (I) and turn the top in a clockwise direction. A'ckk'
sound will be heard. 9.Turn the adjustable screw ® clockwise for finer
grinding, and counterclockwise for coarser grinding.
10. Press and hold the 'On' buttons ® to activate salt and/or pepper
grinding.
NOTE Make grinding more coarse if you find the mill stops grinding
when the adjustment screw ® is at too fine a levell the mill still
doesn't grind then the grinder may also be blocked. In this case,
open the adjustable screw to the coarsest level and shake the mill
back and forth until it starts grinding again.
4