Canon K30274 Benutzerhandbuch Seite 8

mini260/mini320
(1) Insert the battery attachment protrusion located on the side
opposite to the charge lamp (A) into the battery connector, and
then insert the protrusion located on the side with the charge
lamp (B).
(A)
(B) Charge lamp
* The design may differ depending on the printer you are using.
(2) Pull the lock tab on the battery attachment as illustrated below to
secure the battery to the printer.
* The design may differ depending on the printer you are using.
Note
When the battery pack is not used for a long period of time (6 months or longer),
remove the battery from the printer. For how to remove the battery, see
"Removing the Battery from the Printer."
Battery attachment
protrusion
Lock tab
Removing the Battery from the Printer
1
Turn off the printer and disconnect the AC adapter and USB
cable from the printer.
2
Detach the battery from the printer.
iP100 series
Loosen the locking screws by using a coin or a screwdriver to detach
the battery from the printer.
mini260/mini320
(1) Pull out the carrying handle of the printer.
(2) Push the lock tab on the battery attachment as illustrated below
to detach the battery from the printer.
* The design may differ depending on the printer you are using.
6