Canon K30274 Benutzerhandbuch Seite 7

3
Remove the battery connector covers on the printer.
iP100 series
Remove the battery connector cover.
Note
You can store the battery connector cover in the battery
attachment.
mini260/mini320
(1) Pull out the carrying handle of the printer.
(2) Remove two battery connector covers.
* The design may differ depending on the printer you are using.
Note
Store the two battery connector covers in a safe location.
Battery connector cover
4
Attach the battery to the printer.
iP100 series
(1) Align the printer connector of the battery pack with the battery
connector of the printer, and then insert the both left and right
protrusions on the battery attachment as illustrated below.
Protrusion
(2) Secure the battery to the printer by tightening two locking screws.
Tighten the screws securely using a coin or a screwdriver.
Locking screw
Battery connector
Protrusion Printer connector
5