Honeywell TP-COMPACT-WK Benutzerhandbuch Seite 11

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
POWER CONTROL
Press to switch the dehumidifier ON or OFF.
HUMIDITY CONTROL SETTING
When the unit is switched ON, the Humidity Display shows the current humidity percentage. When
current humidity is lower than 35% RH, the Humidity Display will show "Lo" . When current humidity
is higher than 95% RH, the Humidity Display will show "Hi".
Press to select your preferred humidity level. The humidity is adjusted in increments of 5%
by pressing . The adjustable Relative Humidity (RH) range is between 40% RH to
80% RH. Five seconds after setting the preferred humidity setting, the display will revert back
to displaying the current humidity.
Recommended Settings: It is recommended to leave the unit running at 40% humidity at
High Fan Speed during the first 2 to 3 days until
the Relative Humidity has been reduced to a more comfortable level, press
higher RH% that maintains a comfortable humidity level thereafter. A recommended healthy
humidity level is between 40% and 50%.
NOTE: The humidity sensor senses current humidity in the surrounding area. It is normal for a few
degrees of variance to the humidity sensitivity from the sensor.
TEMPERATURE DISPLAY
When the unit is switched ON, the Temperature Display show the current Temperature (°C).
damp odors are removed. After a few days when
EN 10
to choose a