Removing The Palm-Rest Assembly; Installing The Palm-Rest Assembly - Dell Precision 5510 Bedienungsanleitung

b) antenna cover
c) display assembly
d) wireless card
e) battery
f) base cover
5. Follow the procedures in After Working Inside Your Computer.

Removing the palm-rest assembly

1. Follow the procedures in
2. Remove the:
a) base cover
b) battery
c) memory modules
d) Follow the procedure from step 1 to step 4 in
e) wireless card
f) speakers
g) heat-sink
h) fans
i) display assembly
j) power-adapter port
k) system board
l) keyboard
After performing the steps in the prerequisites we are left with the palm-rest assembly.
a. palm-rest assembly

Installing the palm-rest assembly

1. Place the palm-rest assembly on a clean and flat surface.
2. Install the:
a) keyboard
b) system board
c) power-adapter port
d) display assembly
e) fans
f) heat-sink assembly
g) speakers
h) wireless card
i) Follow the procedure from step 3 to step 6 in "Replacing the hard drive".
28 Entfernen und Einbauen von Komponenten
Before Working Inside Your
"Removing the hard drive
Computer.