Setting The Date And Time - Omron SpotArm i-Q142 Gebrauchsanweisung

HEM-1040-E.book 11 ページ ２０１１年１２月２０日 火曜日 午後１時４３分
2.2

Setting the Date and Time

Your blood pressure monitor automatically stores up to 84 individual
measurement values with the date and time for each user.
To make use of the memory and average values functions:
• Set the unit to the correct date and time before taking a measurement
for the first time.
Set the year, month, day, hours and minutes for the current date and
time.
(For details on changing the date and time setting, refer to "Adjusting
the Date and Time Setting".)
The Weekly average buttons are used to set the date and time.
Use the buttons as described below to adjust the date and time setting.
Evening average button
Morning average button
1.
Press the O/I button to turn
the power on. All items on the
display will appear briefly,
then the year digit will flash.
Note: The illustration to the
right shows the display
when the unit is used
for the first time.
: Press this button to increase the value
for the date/time setting.
: Press this button to decrease the value
for the date/time setting.
2. Preparation
EN
11