Akasa INTEGRAL FUSION Handbuch Seite 2

fusion
English
AKASA Company notices
The information contained in this document is subject to change without notice.
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written
permission of AKASA, except as allowed under copyright laws.
The only warranties for AKASA products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. AKASA shall not be liable for technical or editorial errors or omissions contained herein.
Copyright 2006 AKASA ASIA Corporation.
Acknowledgements
Microsoft, Windows, Windows NT and Windows XP are registered trademarks of Microsoft Corporation.
Adobe and Acrobat are trademarks of Adobe Systems Incorporation.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. AKASA disclaims any and all rights in those marks.
Copyright Statement
It is a criminal offence, under applicable copyright laws, to make unauthorized copies of copyright-protected
material, including computer programs, films, broadcasts and sound recordings. This equipment should not be
used for such purposes.
Notice: The manufacture makes no warranty of any kind with regards to this material, including, but not limited
to, the implied warranties of merchantability and fitness for a particular product. The manufacture shall not be
liable for errors contained herein or for incidental consequential damages in connection with the furnishing,
performance, or use of this material. Every effort has been made to ensure that the information in this manual
is accurate. The manufacture is not responsible for printing or clerical errors. Mention of third party products is
for information purposes only and constitutes neither an endorsement nor a recommendation. The manufacture
assumes no responsibility with regards to the loss of data of performance of these products. This document
contains proprietary information, which is protected by copyright (see below). The information contained in this
document is subject to change without notice.
FCC Compliance Statement
This device complies with Part 5 of the FCC Rules. Operation is subject to the following two conditions:
. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can emit radio frequency energy and, if not installed
or used in accordance with the instructions, may cause interference to radio communications. However, television
reception interference can be determined by turning the equipment off and on.
The user is encouraged to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.