Inhaltsverzeichnis
Werbung
Power LED Header
(3-pin PLED1)
(see p.1, No. 23)
Serial ATA3 Connectors
(SATA3_0_1:
see p.1, No. 14)
(SATA3_2_3:
see p.1, No. 15)
(SATA3_4_5:
see p.1, No. 16)
(SATA3_A1_A2:
see p.1, No. 12)
(SATA3_A3_A4:
see p.1, No. 13)
USB 2.0 Headers
(9-pin USB2_3)
(see p.1, No. 28)
(9-pin USB4_5)
(see p.1, No. 27)
(9-pin USB6_7)
(see p.1, No. 26)
(USB8)
(see p.1, No. 25)
Please connect the chassis
1
power LED to this header
PLED-
PLED+
PLED+
to indicate the system's
power status.
These ten SATA3
connectors support SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. If the eSATA port
on the rear I/O has been
connected, the internal
SATA3_A4 will not
function.
To minimize the boot
time, use Intel® Z87 SATA
ports (SATA3_0) for your
bootable devices.
Besides two USB 2.0 ports
USB_PWR
P-
on the I/O panel, there
P+
GND
DUMMY
are three headers and one
port on this motherboard.
1
GND
Each USB 2.0 header can
P+
P-
USB_PWR
support two ports.
Z87 Extreme9/ac
29
Werbung
Inhaltsverzeichnis
