Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Choosing the place for installation
The device must be placed vertically on a flat surface, in a dry and spacious location. The
room should be ventilated. At least 20 cm of clearance should be left around the device.
Water accumulates in the tank (7). An attached hose (9) can be used for water discharge.
The method of installation is described in "CONTINUOUS WATER DISCHARGE" section.
OPERATION OF THE DEVICE
Any changes in settings are signalled by a sound. An air stream from the device should not
be pointed directly at a person. Lift the air outlet cover (3) before switching the device on.
CONTROL PANEL
•
DISPLAY
1. with power on, it displays humidity in the room,
2. while the humidity is being set, it displays data of the humidity chosen,
3. while theccfunction is being set, it displays the values in the „00-24" range,
14|EN
3
4
- this display has 3 functions:
Werbung
Inhaltsverzeichnis
