Explanation Of Symbols; Safety; Intended Use - TRADIX IAN 305962 Bedienungsanleitung

GB/IE/NI

Explanation of symbols

The following symbols and signal words are used in this
manual, on the digital door viewing port (hereinafter re-
ferred to as "door viewing port") or on the packaging.
!
WARNING!
This signal symbol/word indicates a hazard with a medi-
um level of risk which, if not avoided, may result in death
or serious injury.
! CAUTION!
This signal symbol/word indicates a hazard with a low
level of risk which, if not avoided, may result in minor or
moderate injury.
This signal word warns of possible property damage.
Note about handling these operating instruc-
i
tions
This symbol indicates interior use only.
This symbol indicates potential danger to children.
This symbol indicates potential danger in relation to
electric shocks.
This symbol indicates potential danger in relation to
overheating.
This symbol indicates potential danger in relation to
explosions.
6
NOTE!
This symbol indicates potential danger from handling
batteries.
This symbol indicates direct current.
IP20
This symbol indicates protection class.
These symbols inform you about
the disposal of the packaging and
product.
Conformity declaration (see Chapter "13. Con-
formity declaration"): Products that are marked
with this symbol fulfil all applicable Community
regulations of the European Economic Area.

2. Safety

Intended use

! WARNING!
Risk of injury!
The product may not be used near liquids
or in damp spaces. There is a risk of injury!
The product is exclusively suitable for inte-
rior use.
The product is not intended for commercial use. Different
use or a modification to the product are not deemed as
intended use and may lead to risks, such as injuries and
damage. The distributor assumes no liability for damage
that results from improper use.
GB/IE/NI
7