Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB/IE/NI
Format SD card
When formatting the SD card, erase all data stored on the
SD card.
To confirm the formatting of the memory card, press the
OK key
. To cancel the formatting function, press the
9
button. To exit the menu, press the trigger
Factory settings
To reset the unit to the factory settings, press the OK button
again
. To cancel, press the
9
press the trigger
button.
11
C) VERSION
Displays the current version of the firmware used. To exit
the menu, press the trigger
11. Errors/Actions
Errors
Possible causes/measures
No image
- Is the battery dead?
- Are the camera and monitor unit con-
nected?
- Is the lens taped over, or is the visible
area completely darkened?
Other
- Check the battery charge level.
faulty
- Charge the battery with the USB
functions
charging cable on a suitable device.
18
NOTE!
button.
11
button. To exit the menu,
13
button.
11
12. Cleaning and care instructions
Risk of injury!
Before cleaning, remove the battery from
the door viewing port. There is a risk of
electric shock!
- only clean with a dry cloth
13
- do not use any harsh detergents/chemicals
- do not immerse in water
- store in a cool, dry place, protected from UV light
13. Conformity declaration
This device complies with the fundamental re-
quirements and other relevant regulations of the
European Electromagnetic Compatibility Direc-
tive 2014/30/EU, as well as the Low-Voltage Directive
2014/35/EU and the RoHs Directive 2011/65/EU. The
complete original conformity declaration is available from
the importer.
14. Disposal
Disposal of the packaging
The packaging and operating instructions are
made of 100 % environmentally friendly mate-
rials, which you may dispose of at local recy-
cling centres.
Disposal of the product
The product may not be disposed of with normal
household waste. Please find out about disposal op-
tions for the product from your local authority or
town administration.
!
WARNING!
GB/IE/NI
19
Werbung
Kapitel
Inhaltsverzeichnis
