Maintenance - Villeroy & Boch QUARYL Installation - Wartung - Gewährleistung

1.6. FINISHING
Degrease the edges with a cloth with spirit. For sealing, apply a
layer of silicon compound between the edge of the bath and the
wall. This creates a watertight finishing joint (see figure 10).
Read the instructions on the silicon compound packing before
use.
2. MAINTENANCE & GUARANTEE
2.1. MATERIALS
This bath is made of Quaryl . This is quality synthetic coloured
®
throughout and has a hard surface.

2.2. MAINTENANCE

Cleaning
Your bath will look at its best if you give it a regular rub over
with a liquid detergent (Sunlight Lemon, Sqezy) and a sponge or
soft brush.
For cleaning bathtubs with a matt finish, please rinse with soap
and plenty of water.
Removing obstinate spots
Chalk spots are best removed with a vinegar solution
(see figure 11,12).
Proof against household chemicals
Quaryl ® baths easily withstand all normal chemicals used in the
household without the surface of the Quaryl bath being affected.
®
2.3. GUARANTEE
This quality product comes with a 5 year guarantee from the date
of purchase. The guarantee covers: factory faults, changes in
colour and/or cracks resulting from material ageing, and distor-
tions caused by hot water. The guarantee is limited to the repair
or replacement of products supplied.
The guarantee is only valid if the product was installed in accor-
dance with our installation/maintenance terms and conditions.
And with the exception of the necessary drainage/overflow provi-
sion, has not been provided with a system developed or fitted by
third parties and has not been subjected to modification (e.g. the
drilling of holes) which are not indicated in the installation provi-
sions accompanying the product.
To claim against the guarantee please contact your dealer. Conse-
quential damages and the cost of building-in or removing ele-
ments are not covered by the guarantee.
13