Maintenance - Villeroy & Boch CETA Installation - Wartung - Gewährleistung

Position the bath with base frame
over the fastening blocks and
align. Use levelling frame if
necessary (see figure 7).
1.3. MOUNTING THE DRAIN/OVERFLOW
COMBINATION
The drain/overflow combination
is optional. Fit this and connect it
to the drain. Then check for
water-leakage.

1.4. MAINTENANCE

Cleaning
Your bath will look at its best if you give it a regular rub over with a liquid
detergent (Sunlight Lemon, Sqezy) and a sponge or soft brush.
For cleaning bathtubs with a matt finish, please rinse with soap and plenty
of water.
For cleaning the outside of the bath do not use any scouring agent or citric
acid.
Removing obstinate spots
Chalk spots at the inside of the bath are best removed with a vinegar
solution or citric acid.
Proof against household chemicals
This Quaryl bath easily withstands all normal chemicals used in the house-
hold without the surface of the bath being affected.
20
Screw the feet of the frame to the
8
fastening blocks using the screws
supplied (see figure 8).
Seal the feet of the bath frame
with silicon compound (see figu-
re 8). Read the instructions on the
silicon compound packing before
use.
7
9