Temperature Settings - Agrofortel YZ8-48 Bedienungsanleitung

1. Notes for commissioning:
1.1. Check that the egg holders are properly
seated
1.2. Connect the machine to the power using the
power cord
1.3. Turn on the powercord
1.4. Turn on the incubator by pressing button
ON/OFF
1.4.1. After turning on you will hear an alarm
indicating low humidity / temperature - this is
allright
1.4.2. You can mute the alarm by pressing any
button
1.5. Fill water with the supplied vial into the water
canal
HUMIDIFIER INITIALIZATION: With a long shutdown or
initial start, it is sometimes necessary to initialize the
hygrometer. If the hygrometer does not initialize
correctly (display shows EEE), it is necessary to let
the hatcher turned on with the added water and after a
while the hygrometer itself initializes. The second and
fastest option is to breathe on it.

2. Temperature settings

2.1. Press the ``SET`` button
2.2. With "+" and "-" set up the desired
temperature
2.2.1. Incubator is defaultly set to 38°C
(recommended temperatures for hatching in
the chapter 11)