Hydraulic Trolley Jack; Included Items; Description Of Parts; Safety Notes - ULTIMATE SPEED HG01040 Bedienungs- Und Sicherheitshinweise

Hydraulic Trolley Jack

Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information con-
cerning safety, use and disposal. Before using
the product, please familiarise yourself with all
of the safety information and instructions for use.
Only use the product as described and for the
specified applications. If you pass the product
on to anyone else, please ensure that you also
pass on all the documentation with it.
Proper use
The hydraulic vehicle jack is intended for raising
and lowering motor vehicles. Other uses or
modification of the hydraulic vehicle jack shall
be considered as improper use and may lead
to injury or damage. The manufacturer will not
accept liability for loss or damage arising from
improper use. The product is not intended for
commercial use.
Note: Reclose the release valve
use!

Description of parts

Lifting handle
1
Lifting arm
2
Support plate
3
Carrying handle
4
Release valve
5
Lifting handle socket
6
Cover
7
Relief valve
8
Adapter
9
Hex bolt
10
Nut
11
Storing Bracket
12
Saddle
13
Technical data
Stroke:
Maximum load: 2000 kg
Hydraulic oil
grade:
Hydraulic oil
quantity:
Maximum
force on lever:

Included items

1 hydraulic trolley jack
1 adapter
1 lifting handle
1 operating instructions
DANGER! Follow the instructions below to
avoid the threat of loss of life, injury, or
damage to the product etc.
Always use axle stands and wheel chocks
in addition to your hydraulic vehicle jack.
after each Never work under a raised vehicle unless
5
you have taken additional safety precautions.
This is intended to prevent the vehicle from roll-
ing away, sliding off or overturning the jack.
The jack is for lifting purpose only.
Use the product on a solid, level surface
only. Using the product on an unstable or
uneven surface – such as a gravel surface –
may lead to the load slipping.
The person operating the jack must observe
the jack and the load during all movements.
Never work under the raised load if it has
not been made secure by suitable means.
Do not allow the hydraulic vehicle jack to
be used by uninstructed or inexperienced
persons.
135–342 mm
150–357 mm (with adapter )
SAE 10
115 ml
380 N

Safety notes

Ensure that you never exceed the
allowable (rated) load capacity.
2000
kg
GB/CY 5