Troubleshooting; Warranty - Dometic SMP 301-01 Montage- Und Bedienungsanleitung

SMP301
10

Troubleshooting

Fault Cause
12 V outputs The plug-in fuse of the associated 12 V
not supplied output is defective. The red LED next
when the to the plug-in fuse lights up.
device is oper-
The switching power supply has
ating in mains
switched off as a result of the surge
supply mode.
protector. The red LED (fig. 0 1,
page 8) lights up.
12 V outputs The plug-in fuse of the associated 12 V
are not being output is defective. The red LED next
supplied in bat- to the plug-in fuse lights up.
tery operation.
The battery has been connected incor-
rectly.
11

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and warranty processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
EN
Troubleshooting
Repair
Replace it with a plug-in fuse of
equivalent quality.
The surge protector resets itself
automatically as soon as the volt-
age returns to a permissible
value. Otherwise, contact cus-
tomer service.
Replace it with a plug-in fuse of
equivalent quality.
Connect the battery correctly
(chapter "Connecting the switch-
ing power supply" on page 19).
23